W-Section Uncorded Contract Curtain Track Kit – White

W-Section is a slim, lightweight track for medium-weight curtains. At just 116 g/m it’s easy to handle and slips into pelmets, recesses and other tight spots – a good, economical choice for offices, hotel rooms and residential projects. This one is White (RAL 9016) – a bright white that sits quietly against painted walls and ceilings.

What comes in the box

The track at your chosen kit length (1m to 6m), ceiling brackets, end caps, gliders and end stops with screw and eye, plus all the fixings. Kits from 3m upwards come in two lengths with a joiner, which keeps them easy to deliver and handle on site.

Good to know

• Slim, light profile for confined spaces
• Ceiling brackets supplied (these are needed for wave gliders); wall fixing with L-extension brackets
• 6mm groove – runs standard and 60mm or 80mm wave gliders
• End stops with screw and eye for tying off the leading edge
• Bends to a 10cm radius for 90° angles and 30cm for curves
• Made in the UK and covered by a five-year guarantee. Also available corded, and in Black

Hanging your curtains

Ordering curtains from us too? Pencil pleat and pinch pleat headings run on the standard gliders. For wave curtains, pick the wave glider that matches the wave spacing on your curtain order and we’ll make the two to suit each other. The track is sent direct from the manufacturer, so it arrives separately from your curtains.

Ceiling fix: use the ceiling brackets supplied. Bracket centres follow the kit count – three brackets for a 1m track rising to thirteen for 6m. Fixings are included. Ceiling brackets are mandatory when the track is fitted with SurgeWave gliders.

Wall fix: order L-extension brackets separately to bring the track off the wall.

Direct fix: if you need to screw the track straight to the ceiling, order the pre-drilled W-section instead – it is drilled every 22cm, but it cannot be bent and does not take SurgeWave gliders.

Corners and curves: this profile can be bent through the bending service to a minimum 10cm radius for 90° angles (code 16WSBEND) and a 30cm radius for continuous curves (code 16WSCONT). Bent tracks are crated and non-cancellable once formed.

Care: keep the groove clean and dust-free and re-siliconise periodically to prolong smooth running of the gliders.