Heavy Duty H-Section Uncorded Contract Curtain Track Kit – White

If you need a track that simply gets on with the job, this is the one. Heavy Duty H-Section is our everyday contract track – a tough aluminium H-profile that carries heavy fire retardant curtains in hotel bedrooms, care homes, student rooms and offices, day in, day out. It’s plain, dependable and quick to fit. This one is White (RAL 9016) – a bright white that sits quietly against painted walls and ceilings.

What comes in the box

The track at your chosen kit length (1m to 6m), 4cm Leverlock brackets that fix to either the wall or the ceiling – 3 on the shortest kit, up to 13 on the longest – end caps with eye fittings, gliders, end stops and fixings. Kits from 3m upwards come in two lengths with a joiner, which keeps them easy to deliver and handle on site.

Good to know

• Heavy-duty 6mm groove – runs standard, roller and 60mm or 80mm wave gliders
• One bracket does both wall and ceiling fixing
• Bends tightly – 10cm radius for 90° corners, 30cm for curves – just choose a bend above
• 14.2 × 26mm aluminium H-profile, 224 g/m
• Made in the UK and covered by a five-year guarantee
• Also available in Black and Silver; a corded version is available as Heavy Duty Corded

Hanging your curtains

Ordering curtains from us too? Pencil pleat and pinch pleat headings run on the standard gliders, or on roller gliders if the curtains are wide, heavy or drawn several times a day. For wave curtains, pick the wave glider that matches the wave spacing on your curtain order and we’ll make the two to suit each other. The track is sent direct from the manufacturer, so it arrives separately from your curtains.

Wall or ceiling fix: the 4cm Leverlock brackets in the kit fix either way – screw the bracket to the wall or the ceiling, offer up the track and lock the lever. Fixings are included. Bracket centres follow the kit count: three brackets for a 1m track, four for 1.5m, five for 2m, six for 2.5m, seven for 3m, nine for 4m, eleven for 5m and thirteen for 6m. Space them evenly, with a bracket close to each end and one either side of the joiner on two-piece kits.

Gliders and end stops: load the gliders into the groove, fit the end caps (which carry the eye fittings for hooking the leading edge of the curtain) and lock the twist end stops. Roller gliders and SurgeWave gliders drop into the same 6mm groove.

Corners and bays: specify a bent track through the bending service – 10cm minimum radius for 90° angles, 30cm minimum for continuous curves. Bent tracks are made to your drawing, crated for delivery and non-cancellable once formed.

Care: keep the groove clean and dust-free and re-siliconise periodically to prolong smooth running of the gliders.