Measuring guide · Holiday lodges and park homes

Measuring for holiday lodge and park home curtains

Low ceilings, bay ends, pitched roofs and a lot of small windows. Measure one unit carefully and the fleet follows.

What is different in lodges

The curtains, roman blinds, pelmets and tracks and poles guides cover how to take every measurement. This page adds what is different about measuring in this sector and gives you the schedule we need.

Lodges and park homes are built to a manufacturer's model, so units of the same model share window sizes to within a few millimetres. The difficulty is the building itself: ceilings at 2.2m, bay or splayed ends, windows tight to the corner, and roof pitches that leave no room for stack-back.

Measuring a model

One unit measured in full

Measure every window in one unit of each model: track or pole width, drop in three places, finish point, projection, and what is under the window. Check a second unit of the same model at two or three windows; if they agree within 10mm, order by model.

One unit measured in full

Low ceilings

With the window head close to the ceiling there is often less than 100mm above the recess. Fix the track as high as the ceiling allows, or use a ceiling-fixed track, and measure the drop from the fixing. Tell us if the heading has to sit tight under the ceiling so we can suggest a low-profile heading.

Low ceilings

Pitched ceilings

Vaulted lodge ceilings drop towards the eaves. Fix the track level at the height that clears the ceiling at its lowest point, including where the curtains stack, and measure from there. Where that leaves no room, a roman blind inside the recess is the better answer.

Pitched ceilings

Bay and splayed ends

Lodge bays are usually three faces at a shallow angle. Measure each face along the track line and note the angle, or send a photo; a single curtain each end with the bay left clear is the usual make-up.

Bay and splayed ends

Small and awkward windows

Bathroom, bedroom and gable windows are often too small for a pair of curtains to look right. A roman blind inside the recess, or a single curtain on a pole, suits them; measure per the roman blinds guide.

Small and awkward windows

Windows tight to a corner

Where the window is within 150mm of a corner there is no room for stack-back on that side. Tell us which side, and we make a single-draw curtain stacking away from the corner, or fit a track with a short return.

Windows tight to a corner

Ordering for a fleet

Give us the model, the number of units and the unit numbers, with the master measurements per model. We label curtains by unit and window and hold the dye lot for repeat orders as the park expands. Bedrooms take dimout or blackout with returns; living areas dimout.

The schedule we need

One line per window, all figures in millimetres. Send it as a spreadsheet, a PDF or a photo of a marked-up plan.

Model and unit
Manufacturer, model, unit numbers.
Window reference
Room and window, e.g. Bed 1 W1.
Width and drop
Track or pole width; drop (smallest of three); in mm.
Fixing and headroom
Wall or ceiling; distance from recess head to ceiling; pitch if any.
Finish point
Floor, sill or above a heater / bed.

Rather we measured?

For larger projects we can measure on site. Site surveys carry a fee that depends on the location, the number of windows and the stage of the build; we confirm it before anything is booked. Site surveys and installation.

Frequently asked questions

Can you work from the manufacturer's drawings?

Often, yes. Send the model's floor plan and elevations and we can size the tracks and curtains from them, then check one unit on site before the order is made.

What standard applies?

BS 5867-2 Type B for holiday accommodation. Where units are let as sleeping accommodation under a fire risk assessment that asks for Type C, filter the holiday accommodation collection by standard.

Do you fit on parks?

Yes. Site surveys carry a fee that depends on the location, the number of windows and the stage of the build; we confirm it before anything is booked.

Send the model list

Send the models, unit counts and one set of measurements per model and we quote the fleet. For larger projects we can measure on site. Site surveys carry a fee that depends on the location, the number of windows and the stage of the build; we confirm it before anything is booked.